Key Takeaways:
- The Headrest Safe installs in under 15 minutes using included hardware and common tools.
- Adapter sleeves ensure a snug fit with most vehicle headrest mounts.
- Order our OEM posts for the most snug fit
- Proper installation secures the safe in place, preventing unauthorized removal.
Installing a car gun safe shouldn’t be complicated. When it comes to securing your firearm or valuables, the process should be fast, discreet, and reliable. Whether you’re concerned about theft or legal compliance, knowing how to install a gun safe in your car correctly ensures your gear stays both hidden and accessible.
The Headrest Safe is designed for easy DIY setup. No custom tools or professional help needed. Just follow this guide and you’ll be protected in under 15 minutes.
Tools & Materials Needed to Install Headrest Safe
- The Headrest Safe™ (includes mounting hardware, adapter sleeves, and Allen wrench)
- Pliers
- Your vehicle’s existing headrest holes
Everything else comes in the box.
Step-by-Step Installation
- Remove your current headrest.
- Program your lock before installation, if needed.
- Tighten the mounting posts to the plate using the eight pan-head screws.
- Attach the mounting plate to the headrest using the Allen wrench and three button-head screws.
- Remove the bottom foam insert.
- Use adapter sleeves to match your vehicle’s headrest hole diameter.
- Insert the threaded rod into the mounting post nearest the safe door. Hand-tighten, then secure with pliers.
- Install the safe in your vehicle seat by compressing the wing nut tabs and sliding the posts into place.
Once installed, it locks in securely and won’t come out without the proper tools.
Troubleshooting Common Mistakes
- Headrest too loose? Try a larger adapter sleeve for a tighter fit. Or contact us for OEM style posts
- Lock not engaging? Recheck your programming steps
Video Walkthrough
Watch the full installation video here:
Installing Your Headrest – The Headrest Safe™
Leave a comment: